Star Micronics NX-1020 User Manual page 73

Set horizontal tab stops
Mode ASCII Decimal
Hexadecimal
Both cESC> "D" nl n2 . . . CO> 27 68
nl
n2 . . . 0
1B 44 nl n2 . . . 00
Cancels all current horizontal tab stops and sets new tab stops at
columns nl, n2, etc. in the current character pitch (pica pitch if pro-
portional spacing is currently selected), where nl, ~2, etc. are
numbers between 1 and 255. The maximum number of horizontal
tab stops allowed is 32 in Standard mode and 64 in IBM mode. The
tab stops must be specified in ascending order, any violation of
ascending order terminates the tab stop list. Standard termination is
by the <O> control code. To clear all tab stops, specify <ES0 "D"
co>.
Set horizontal tab stops every
n
columns
Mode ASCII Decimal Hexadecimal
std. .
cESC> "e" "0" n
27 101 48 n
1B 65 30 n
<ESC> "err CO> n 27 101 0 n
lB6500 n
Cancels all current horizontal tab stops and sets new tab stops every
n columns, where n is between 1 and 127.
Reset all tab stops
Mode ASCII
Decimal
Hexadecimal
IBM
<ESC> "R"
27 82 1B 52
Resets the horizontal tab stops to their power-up values in which a
tab stop is set every 8 column starting at column 9. Also clears all
vertical tab stops.
Horizontal tab
Mode
ASCII Decimal
Hexadecimal
Both
<I-IT>
9 09
Moves the print position to the next horizontal tab stop. Ignored if
there is no next horizontal tab stop in the current line. Note that when
underlining is selected, spaces skipped by horizontal tabulation are
not underlined.
65