Graphics Tab - Ricoh Aficio 401 Operating Instructions Manual

Graphics Tab

The Graphics tab includes a [Font] button you use to access the Font
Installer window. You use the Font Installer window to install fonts when
necessary (refer to the Font Installer Window" section in this chapter for
further information on the Font Installer window).
The following lists the descriptions and parameters for the fields contained
on the Graphics tab.
Field Parameter
Halftone Text
Photographic
Graphics HP-GL/2
Mode Raster
Print On
Off
TrueType
as Graphics
Resolution 600 dpi
300 dpi
Edge On
Smoothing Off
Graphics High
Quality Medium
Low
Description
Allows you to specify the Halftone resolution you
want to use. Selecting Text provides lower
resolution and faster printing speeds.
The default value is Text.
Allows you to specify the graphic print quality.
Selecting HP-GL/2 provides faster printing speeds
with slightly diminished print quality. Selecting
Raster incorporates raster and bitmap formats and
produces high print quality.
The default value is HP-GL/2.
Allows you to specify whether you want to print
TrueType fonts as graphics. This field is only active
when you specify Raster as the Graphics Mode.
The default value is Off.
Allows you to specify the output resolution for the
printer.
The default value is 300 dpi.
Allows you to specify that you want to use the Edge
Smoothing feature, thus enhancing print quality.
When Edge Smoothing is enabled, the printer reduces
ragged edges, providing printed output with smooth
curved and diagonal lines. Edge smoothing results in
reduced printing speeds.
The default value is On.
Allows you to specify the print quality you want to
use. The value is automatically set to High when
you select HP-GL/2 as the Graphics Mode,
regardless of what you specify in this field.
The default value is High.
USING THE PRINTER DRIVERS
3-11