Partitioning; Installing Dram Simm - Ricoh Aficio 401 Operating Instructions Manual

Partitioning

The hard disk partitioning is used as follows:
Permanent Partition - used by PCL 5e for font and macro storage. This
partition is formatted by an explicit command received from the printer
Control Panel.
PostScript Partition - used exclusively by the PostScript option. This
separate partition allows PostScript to format its disk as required by the
PostScript command programs without affecting the other disk parti-
tions.
Dynamic Random Access Memory
The base configuration of the machine includes eight megabytes (8 MB) of
onboard Dynamic Random Access Memory (DRAM).
additional DRAM SIMM modules. Up to 64 MB of additional DRAM can be
requested for a maximum of 72 MB of DRAM. The DRAM specifications
are as follows:
72 pin
8, 16, or 32 MB DRAM SIMM module.
70 nanoseconds or faster.
Note: The machine allocates PostScript memory according to the recom-
mendations specified by Adobe. Based on the amount of RAM in-
stalled, a fixed amount of RAM is allocated for storage of incoming
input data.
Installing DRAM SIMM Modules
Installation of DRAM SIMM modules is performed by a service technician.
MEMORY AND OPTIONS
You can request
B-3