Font Source Setting; Font Number Setting - Ricoh Aficio 401 Operating Instructions Manual

USING THE CONTROL PANEL
Font Source Setting Screen
When you press the [Change] button for the Font Source option, the Font
Source Setting screen displays.
You use this screen to specify the location of the default font. The options
are as follows:
Internal - specifies that you want to use the resident font as the default
font.
Soft - specifies that you want to use the font downloaded from the host
machine as the default font. The default is Internal.
Font Number Setting Screen
When you press the [Change] button for the Font Number option, the Font
Number Setting screen displays.
You use the numerical keys to change the value for the default font you
want to use. The valid range is 0 to 50, entered in increments of 1. The
default value is zero (0).
Note: You can obtain the value for the font you want to use from the PCL
Font List.
2-22