Device Options Tab - Ricoh Aficio 401 Operating Instructions Manual

USING THE PRINTER DRIVERS

Device Options Tab

The following lists the descriptions and parameters for the fields contained
on the Device Options tab.
Field Parameter
Reverse On
Print Order Off
Job On
Separation Off
3-12
Description
Allows you to specify whether you want to use the
Reverse Print Order feature, which delivers the output
face-up in the bin in ascending order.
When you enable this feature, the host input data is
rasterized and stored in the order received. The data
is then retrieved from the HDD and printed in reverse
order so that the output is delivered face-up in the
correct page sequence from page 1 to the end.
When you request multiple copies, the output consists
of sets of copies in the correct page sequence (for
example, three sets each in 1,2,3,4,5 page order).
When you select Long Edge Binding or Short Edge
Binding as the Duplex option, do not send the
OUTPUT PJL command. When you select 1 Staple
or 2 Staples as the Staple option, make to send the
OUTPUT PJL command with the REVERSE setting
specified. When you select Bypass Tray as the
Paper Source options, make sure to send the
OUTPUT PJL command with the NORMAL setting
specified.
The default value is On.
Allows you to specify whether you want to use Job
Separation, indicating that you want the machine to
automatically separate the print jobs.
The separation is implemented either as a mechanical
offset, or with a sheet of paper, depending on the type of
trays installed on the machine.
When a mechanical offset is used, the finisher
activates a jogger mechanism that moves the shift
tray slightly to the right or to the left for each job.This
makes it easy to determine where the end of a set or
job occurs. Job separation is especially useful for
separating collated jobs.
This option is available only when the optional finisher
is installed.
The default value is Off.