Table of Contents
Advertisement
Main Menu
Section
MOTOR WIRES
OPEN INWARD
Brown
Brown
(Reverse wires for
outward opening)
1 - SAFETY NOTICE
- This Instructions Manual (Instructions) contains important information regarding safety
- Read the entire document before you install any of the equipment
- Installation must be carried out by qualified installers
- Installation must be in accordance with all state and federal laws and regulations relating to Electrical Safety
in your area
- Make sure that all cabling and wiring are in accordance with Wiring Rules AS 3000:2007
- Do not modify the equipment unless directed to by the Instructions. Modifications may cause irreversible
damage to the equipment and result in malfunction. King-Gates and LiteStart disclaim any liability for damage
resulting from modified equipment.
- Ensure that no damage will be caused by automating the gate. Pay particular attention to any damage that
may be caused by impact, crushing, shearing, dragging, etc. as well as other general dangers.
Before installing any of the equipment ensures that the gate can move freely through its motion and that nothing
is blocking or interfering with its path of travel.
- During installation and use, ensure that solid objects or liquids cannot enter the control box.
Before connecting the control box to the mains power
1 - Verify that all wirings done as described in section 2 above
2 - Ensure that the gate can move freely through its motion and that nothing is blocking or interfering with its
path of travel
3 - Ensure that no damage will be caused by automating the gate
4 - Motor's terminals MUST be plugged in before powering the box
2
Programming
White
White
button
Page
2
3
4
4
5
5
5
5
6
6
6
6
7
7
8
8
9
10
DipSwitches
Section 3
Potentiometers
(section 4)
Hide quick links:
Advertisement
Table of Contents
