Advertisement
Chapter 3 Installation and Test Operation
2) Pnet Connector structure and wiring method
(1) Input Line: green line is connected to A1, red line is connected to B1
(2) Output line: green line is connected to A2, red line is connected to B2
(3) Connect shield to clamp of shield
(4) In case of installing the connector at terminal, install the cable at A1, B1
<Connector structure>
4
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
Honeywell
<Cable structure>
<Cable wiring method>
R240
January 2019
Advertisement
