Advertisement
Chapter 7 N Configurator Setting
7.2 Installation
7.2.1 System requirements
Pentium or later
More than 256 Mbytes of RAM
Windows XP/VISTA/7/8.x/10, 32/64 bit
More than 500 Mbytes of hard disk
Resolution: 1024 x 768 pixel or more
1280 x 1024 pixel recommended
7.2.2 How to install Program
Please see the software manual of N Configurator for more details. We will discuss the
composition after the installation of the software.
(1) Directory after installation
After the installation, generally, located folder"\SoftMaster\nCongirurator" directory is
composed as follows.
- N Configurator: Root directory of configuration tool for PROFIBUS DP Master
- bmp:
- bnr:
- gsd:
- prj:
- sys:
(2) Caution after installation
After the installation is completed, users should be aware of following things. The default
GSD files provided are our company's smart I/O and inverter, so other companies'
products or new products are not updated. Therefore, if there is a new GSD file, then copy
it to the GSD directory to use, and copy bitmap image files used by the GSD to the bmp
directory. Start again the N Configurator program to apply the copied GSD.
2
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
[Figure 7.2.1] The structure of installation directory
Bitmap depository used by the GSD file
Network Configuration binary image file depository
GSD file depository provided by the manufacturer of PROFIBUS DP module
Network Configuration Project depository
Application setting directory used by the tool
Honeywell
R240
January 2019
Advertisement
