Advertisement
9.3 Operation Sequence of P2P
Operation sequence of P2P
No.
S/W applied
1
2
N Configurator
3
4
5
6
7
8
9
10
SoftMaster
11
12
13
14
3
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
Operation
Execute Configuration tool
Set Network Configuration
Connect to
communication port
Download Network
Configuration
SoftMaster execution
Make new file
Set SoftMaster connection
Connect to SoftMaster
IO Information Read
Define P2P project
Add P2P
P2P Block Setting
P2P Parameters Write
P2P Enable
[Table 9.3.1] Operation sequence of P2P
Honeywell
Details
Execute N Configurator
Refer to Chapter 7 N Configurator Setting (2MLL-
PMEB/C)
Refer to Chapter 7 N Configurator Setting (2MLL-
PMEB/C)
Refer to Chapter 7 N Configurator Setting (2MLL-
PMEB/C)
Execute installed SoftMaster
Project New project
Setting project name and type
Select
applicable
connection
SoftMaster Online Connection settings
SoftMaster Online Connect
SoftMaster Online Diagnosis I/O Information
Specify "P2P" on the SoftMaster screen
Right click the PLC Add item Communication
module setting and set the communication module,
base, slot, P2P number
Double-click the cell on the "P2P" screen
1) For Write: specify Read area (CPU area)
2) For Read: specify Save area (CPU area)
Online Write: check applicable P2P and write
Online Communication module setting Enable
Link: enable applicable P2P
Chapter 9 P2P
driver
through
R220
January 2019
Advertisement
