Advertisement
Chapter 4 System Configuration
4.1.2 ML200 Pnet + Composite System
If it is used with another company product, GSD file provided by the maker is needed. After GSD file is copied
to GSD folder of Pnet configuration software tool(SYCON, N Configurator) and then if you use Pnet
configuration software tool(SYCON, N Configurator), you can configure the slave modules in the network
automatically.
2
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
[Figure 4.1.2] ML200 Pnet + Composite system Diagram
Honeywell
Sensor
R240
January 2019
Advertisement
