Chapter 10 Program Example
[Figure 10.3.14] Screen that has been set through Automatic Network Scan
To change Slave Properties, click a module from the topology and change them through the Slave
Properties Window on the left bottom.
10.3.2 SoftMaster settings
This part describes how to assign the internal memory by SoftMaster..
Click 'Project' ->'New Project' and select project name and PLC series in the New Project window.
36
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
[Figure10.3.15] New project
Honeywell
R220
January 2019