Advertisement
Chapter 10 Program Example
Network setting is completed as shown below.
Communication speed setting is as shown below. [Setting] - [Bus parameter], Baud rate setting of master
module is set here. Our product SMART-I/O series has a function of speed setting automatically. (For other
product slave module, refer to the other product slave module's manual.)
Communication speed is accorded to Master (Pnet I/F) module. After [Setting] – [Master setting] is as shown
below.
6
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
[Figure 10.1.10] Network setting completed
[Figure 10.1.11] Selection of communication speed of master module
[Figure 10.1.12] DP Master Settings
Honeywell
R220
January 2019
Advertisement
