Honeywell 2MLL-PMEC User Manual page 136

Chapter 10 Program Example
Double click a module from Module Selection to insert it to the setting table below. Repeat this
process until all of the wanted modules are inserted to the table. To delete a module from the table,
double click the module to be deleted.
[Figure 10.2.9] Slave Module Setting
Setting a network is completed (See [Figure 10.2.10]). Now, a bus parameter needs to be set.
[Figure 10.2.10] Screen of Network Setting Completion
19 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide R220
Honeywell January 2019