Introduction; Safety Information; Intended Use; Qualification Of Personnel - JUMO LOGOSCREEN 601 Manual

1

Introduction

1.1

Safety information

Note symbols
NOTE!
This symbol refers to important information about the product, its handling, or additional benefits.
REFERENCE!
This symbol refers to additional information in other sections, chapters, or other manuals.
1.2

Intended use

The device is designed for use in an industrial environment as specified in the technical data. Other uses
beyond those defined are not viewed as intended uses.
The device has been manufactured in compliance with applicable standards and directives as well as
the applicable safety regulations. Nevertheless, improper use may lead to personal injury or material
damage.
To avoid danger, only use the device:
• For the intended use
• When in good order and condition
• When taking the technical documentation provided into account
Risks resulting from the application may arise, e.g. as the result of missing safety provisions or wrong
settings, even when the device is used properly and as intended.
1.3

Qualification of personnel

This document contains the necessary information for the intended use of the device to which it relates.
It is intended for staff with technical qualifications who have been specially trained and have the appro-
priate knowledge in the field of automation technology.
The appropriate level of knowledge and the technically fault-free implementation of the safety informa-
tion and warnings contained in the technical documentation provided are prerequisites for risk-free
mounting, installation, and startup as well as for ensuring safety when operating the described modules.
Only qualified personnel have the required specialist knowledge to correctly interpret and implement the
safety information and warnings contained in this document in specific situations.
1.4

Content of this document

NOTE!
This document applies to paperless recorders of types 706521 and 706530.
This document describes the application of the ST editor with which users can create their own applica-
tions in the PLC programming language "structured text" (ST) for the device. The document is intended
for users with relevant programming knowledge.
The PLC programming language "Structured Text" (ST) is described in the standard DIN IEC 61131-3.
Detailed information about programming can be found in this standard. The ST module of the respective
device supports only a subset of the programming language described in the standard.
In addition to this document, the operating manual of the respective device must be observed:
• Type 706521:
Document 70652100T90Z...K...
• Type 706530:
Document 70653000T90Z...K...
1 Introduction
5