Troubleshooting - Steinberg UR22C Operation Manual

Troubleshooting

The power indicator is off
The power indicator
flashes continuously
The USB indicator flashes
continuously
No Sound
Is the [POWER SOURCE] switch set properly?
The power indicator does not light when power is not supplied to the device.
Move the [POWER SOURCE] switch to the [5V DC] jack side when using AC
adapter or move the switch to [USB 3.0] jack side for bus-powered supply
(computer only).
Is there a problem with power supply?
The indicator flashes continuously If the power supply is insufficient. Move the
[POWER SOURCE] switch to [5V DC] jack side and use the USB power adaptor
or USB mobile battery for the power supply.
Confirm whether or not a proper USB cable is used.
• Make sure to use the included USB cable.
• For a connecting the device to the USB Type-C port of a computer, use a
commercially available USB 3.1 Type -C to Type-C cable.
Has TOOLS for UR-C been installed properly? (Computer only)
The indicator flashes continuously when the computer or iOS device does not
recognize the device. Refer to the Startup Guide instructions to complete the
TOOLS for UR-C installation.
Has TOOLS for UR-C been installed properly? (Computer only)
Refer to the Startup Guide instructions to complete the TOOLS for UR-C
installation.
Confirm that a proper USB cable is being used.
Make sure to use the included USB cable.
Are the volume controls of the device set to appropriate levels?
Confirm the levels of the [OUTPUT] knob and [PHONES] knob.
Are the microphones and monitor speakers connected to the
device properly?
Refer to the section "Connection Examples" (pages 23, 27) to confirm the
connection.
Are the audio driver settings on DAW software set properly?
Refer to the section "Configuring the Audio Driver Settings on DAW Software"
(page 24) to set it.
Troubleshooting
UR22C Operation Manual 30