Steinberg UR22C Operation Manual page 12

Setup Window
This window is for configuring the common settings of the
device.
1
2
3
1 Device
Selects the device when simultaneously connecting one
or more devices that are capable with dspMixFx.
2 Device Settings
Opens the Control Panel.
3 HPF Setting
Selects the cutoff frequency of the high pass filter.
Settings: 120 Hz, 100 Hz, 80 Hz, 60 Hz, 40 Hz
4 Zoom
Changes the window size.
Settings: 100%, 150%, 200%, 250%, 300%
5 Knob Mode
Selects the method of operating the knobs on dspMixFx
UR-C.
Settings Description
Circular Drag in a circular motion to increase and
decrease the parameter. Drag on a dial
clockwise to increase, and counterclockwise to
decrease. If you click any point on the knob,
the parameter will jump there instantly.
Linear Drag in a linear motion to increase and
decrease the parameter. Drag upward or
rightward to increase, and downward or
leftward to decrease. Even if you click any point
on the knob, the parameter will not jump there.
6 About
Indicates the version of the firmware and software.
4 5 6
Software
UR22C Operation Manual 12