Setting Mode 1 - Daikin VRV IV-S RXTQ-TAVJU Series Service Manual

Field Setting from Outdoor Unit
3.3

Setting Mode 1

This mode is used to set and check the following items.
1. Set items.............In order to make COOL/HEAT selection in a batch of outdoor unit group,
2. Check items........The following items can be checked.
101
change the setting.
• COOL/HEAT selection (IND)................ Used to select COOL or HEAT by
• COOL/HEAT selection (MASTER)....... Used to select COOL or HEAT by
• COOL/HEAT selection (SLAVE) .......... Used to select COOL or HEAT by
(1) Current operating conditions (Normal / Abnormal / In check operation)
(2) Setting conditions of COOL/HEAT selection (Individual / Batch master /
Batch slave)
(3) Low noise operating conditions (In normal operation / In low noise
operation)
(4) Demand operating conditions (In normal operation / In demand operation)
SiUS331604E
individual outdoor unit (factory
setting).
outdoor unit group with the master
unit.
outdoor unit group with the slave unit.
Field Setting