Supported Provisioning Protocols; Supported Provisioning Server Discovery Methods - Yealink Teams Series Administrator's Manual

•

Supported Provisioning Server Discovery Methods

• Configuring a Provisioning Server

Supported Provisioning Protocols

Yealink Teams IP Phones support several transport protocols for provisioning:
• Trivial File Transfer Protocol (TFTP)
• File Transfer Protocol (FTP)
• Hyper Text Transfer Protocol – Secure (HTTPS)
• File Transfer Protocol – Secure (FTPS)
Note: There are two types of FTP methods—active and passive. The phones are not compatible with active
FTP.
You can specify the transport protocol in the provisioning server address, for example, http://xxxxxxx. If not
specified, the TFTP protocol is used.
Supported Provisioning Server Discovery Methods
After the phone has established network settings, it must discover a provisioning server to obtain software updates
and configuration settings.
The phone supports the following methods to discover the provisioning server address:
• DHCP: DHCP option can be used to provide the address or URL of the provisioning server to the phones. When
the phone requests an IP address using the DHCP protocol, the resulting response may contain option 66 (for
IPv4) or the custom option (if configured) that contains the provisioning server address.
• Static: You can manually configure the server address via phone user interface or web user interface.
DHCP Provision Configuration
•
• Static Provision Configuration
DHCP Provision Configuration
You can select to use IPv4 or custom DHCP option according to your network environment. The IPv4 or custom
DHCP option must be in accordance with the one defined in the DHCP server.
The following table lists the parameters you can use to configure DHCP provision.
Parameter
Description
Permitted Values
Default
Web UI
Parameter
Description
Permitted Values
Default
static.auto_provision.dhcp_option.enable
It triggers the DHCP Active feature to on or off.
0-Off
1-On, the IP phone will obtain the provisioning server address by detecting DHCP
options.
1
Settings > Auto Provision > DHCP Active
static.auto_provision.dhcp_option.list_user_options
It configures the custom DHCP option for requesting provisioning server address.
Multiple DHCP options are separated by commas.
Note: It works only if "static.auto_provision.dhcp_option.enable" is set to 1 (On).
Integer from 128 to 254
Blank
| Phone Provisioning | 44
<y0000000000xx>.cfg
<y0000000000xx>.cfg