Yealink Teams Series Administrator's Manual page 25

Permitted Values String within 32 characters
Default Blank
Parameter static.wifi.X.ssid
Description It configures the SSID of a specific wireless network.SSID is a unique identifier for
accessing wireless access points.
Note:It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to 1
(Enabled).
Permitted Values
String within 32 characters
Default
Blank
Parameter static.wifi.X.priority
Description It configures the priority for a specific wireless network.5 is the highest priority, 1 is
the lowest priority.
Note:It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to 1
(Enabled).
Permitted Values Integer from 1 to 5
Default 1
Parameter static.wifi.X.security_mode
Description
It configures the security mode of a specific wireless network.
Note:It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to 1
(Enabled).
Permitted Values
NONE, WEP, WPA/WPA2 PSK, 802.1x EAP
Default NONE
Parameter static.wifi.X.cipher_type
Description It configures the encryption type of a specific wireless network.If
"static.wifi.X.security_mode" is set to NONE, the permitted value of this parameter is
NONE.
If "static.wifi.X.security_mode" is set to 802.1x EAP, the permitted values of this
parameter are PEAP, TLS,TTLS or PWD.
Note:It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to 1
(Enabled).
Permitted Values NONE, PEAP, TLS, TTLS, PWD
Default NONE
Parameter static.wifi.X.password
Description It configures the password of a specific wireless network.
Note:It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to 1
(Enabled).
Permitted Values String within 64 characters
Default Blank
[2]
[2]
[2]
[2]
[2]
| Phone Network | 25
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg