Yealink Teams Series Administrator's Manual page 32

overwrite_mode
specific_model.excluded_mode
Tip: The line beginning with "#" is considered to be a comment. You can use "#" to make any comment in
the boot file.
Customizing a Boot File
Procedure
1. Open a boot template file.
2. To add a configuration file, add include:config <> or include:config "" to the file. Each starts on a separate line.
3. Specify a configuration file for downloading.
For example:
• include:config <configure/Teams.cfg>
• include:config "http://10.2.5.206/configure/account.cfg"
• include:config "http://10.2.5.206/configure/screensaver.cfg"
4. To specify configuration files for specific phone models, add specific phone modelsin front of include:config <>
or include:config "". Multiple phone model names are separated by commas.
Enable or disable the overwrite mode. The overwrite mode applies
to the configuration files specified in the boot file. Note that it only
affects the parameters pre-provisioned via central provisioning.
1-(Enabled) - If the value of a parameter in configuration files
is left blank, or if a non-static parameter in configuration files is
deleted or commented out, the factory default value takes effect.
0-(Disabled) -If the value of a parameter in configuration files is
left blank, deleted or commented out, the pre-configured value is
kept.
Note: Overwrite mode can only be used in boot files. If a boot file
is used but the value of the parameter "overwrite_mode" is not
configured, the overwrite mode is enabled by default.
Enable or disable the exclude mode. The exclude mode applies to
the configuration files specified in the boot file.
0-Disabled (AppendMode), the phone downloads its own model-
specific configuration files, and downloads other model-unspecified
configuration files.
1-Enabled (ExcludeMode), the phone attempts to download its
own model-specific configuration files; if there is no own model-
specific configuration files found on the server, it downloads
model-unspecified configuration files.
Note: Exclude mode can only be used in boot files.
If a boot file is used but the value of the parameter
"specific_model.excluded_mode" is not configured, the exclude
mode is disabled by default.
| Phone Provisioning | 32