Yealink Teams Series Administrator's Manual page 39

For example, for IPv4: http://192.168.0.10 or 192.168.0.10; for IPv6: http://[2005:1:1:1:215:65ff:fe64:6e0a] or
[2005:1:1:1:215:65ff:fe64:6e0a]
4. Enter the user name and password.
5. Click Login.
Web Server Type Configuration
Yealink Teams IP phones support both HTTP and HTTPS protocols for accessing the web user interface. You can
configure the web server type. Web server type determines access protocol of the web user interface. If you disable
to access web user interface using the HTTP/HTTPS protocol, both you and the user cannot access the web user
interface.
The following table lists the parameters you can use to configure web server type.
Parameter
Description
Permitted Values
Default
Web UI
Phone UI
Parameter
Description
Permitted Values
Default
Web UI
Phone UI
Parameter
Description
Permitted Values
Default
Web UI
[1]
static.wui.http_enable
It enables or disables the user to access the web user interface of the phone
using the HTTP protocol.
0-Disabled
1-Enabled
1
Network > Advanced > Web Server > HTTP
> Settings > Device Settings > Network(Admin only, default
password: admin) > Web Server > HTTP Status
[1]
static.network.port.http
It configures the HTTP port for the user to access the web user interface of
the phone using the HTTP protocol.
Integer from 1 to 65535
80
Network > Advanced > Web Server > HTTP Port (1~65535)
> Settings > Device Settings > Network(Admin only, default
password: admin) > Web Server > HTTP Port
[1]
static.wui.https_enable
It enables or disables the user to access the web user interface of the phone
using the HTTPS protocol.
0-Disabled
1-Enabled
1
Network > Advanced > Web Server > HTTPS
| Phone Provisioning | 39
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg