Gsm Ota Frequency Scanner; Setting Mode; Setting Frequency - JDS Uniphase JD7105B Manual

Setting Mode

Step
1. Connect the cable
2. Select the mode
MODE
[Signal Analyzer]
[GSM]
[OTA]
[Frequency Scanner]

Setting Frequency

Step
1. Set the frequency
FREQ/DIST
[Start Frequency]
Enter a value
[MHz]
[# of Channels]
Enter a value between 8 and 64
[Enter] or ENTER
FREQ/DIST
 START FREQUENCY: Changes the starting frequency in the frequency scanner. The first
frequency in the full view graph changes accordingly. Values can be entered with the numeric
keys and the input is completed by selecting the MHz unit soft key.

# OF CHANNELS: Sets the number of channels to be scanned and displayed in the full view
graph. Values from 8 to 64 can be entered with the numeric keys and the input is completed by
pressing the Enter soft key or ENTER hard key.
GSM OTA F
REQUENCY
Description
Connect an Omni/Directional RF Antenna to the to the
Spectrum Analyzer RF In 50Ω port of the JD7105B.
Press the MODE hard key.
Press the Signal Analyzer soft key.
Press the GSM soft key.
Press the OTA soft key.
Press the Frequency Scanner soft key.
Description
Press the FREQ/DIST hard key.
Press the Start Frequency soft key.
Use the numeric keys.
Press the unit soft key to complete the input.
Press the # of Channels soft key.
Use the numeric keys.
Press the Enter soft key or ENTER hard key.
65
GSM/GPRS/EDGE SIGNAL ANALYZER
JD7105B Base Station Analyzer
S
CANNER