Table of Contents
Advertisement
JD7105B Base Station Analyzer
Setting Mode
Step
1.
Connect the cable
2.
Select the mode
MODE
[Signal Analyzer]
[GSM]
[OTA]
[Channel Scanner]
Setting Channel
Step
1.
Select the channel standard
FREQ/DIST
[Channel Standard]
Select a channel standard
[Select] or ENTER
2.
Set the channel to be scanned
[Start Channel]
Enter a value
[Forward] or [Reverse]
[Chan Step Size]
Enter a value
[Enter] or ENTER
[# of Channels]
Enter a value between 8 and 64
[Enter] or ENTER
GSM/GPRS/EDGE SIGNAL ANALYZER
GSM OTA C
Description
Connect an Omni/Directional RF Antenna to the to the
Spectrum Analyzer RF In 50Ω port of the JD7105B.
Press the MODE hard key.
Press the Signal Analyzer soft key.
Press the GSM soft key.
Press the OTA soft key.
Press the Channel Scanner soft key.
Description
Press the FREQ/DIST hard key.
Press the Channel Standard soft key to get the pop-up
window of the channel standard list.
Press the arrow keys, rotate the knob, or press the Page
Up and Page Down soft keys to highlight a frequency
band to select.
Press the Select soft key or the ENTER hard key.
Press the Start Channel soft key.
Use the numeric keys to input value.
Press one of the soft keys.
Press the Chan Step Size soft key.
Use the numeric keys.
Press the Enter soft key or ENTER hard key.
Press the # of Channels soft key.
Use the numeric keys.
Press the Enter soft key or ENTER hard key.
62
S
HANNEL
CANNER
Advertisement
Table of Contents
