JDS Uniphase JD7105B Manual page 61

it is highly recommended to use the same reference clock as signal source. Trigger mode can be
changed by using the TRIGGER hot key.
STANDARDS
Clock Type
10 MHz Internal
External
External GPS
PP2S Internal
External
External GPS
EXT REF CLOCK INTERFACE SPECIFICATION
Port Name
Even Sec Trigger In
Ext Ref In
Reference
Internal 10 MHz
External Ref Clock
GPS Clock
Internal Trigger
External Trigger
GPS
External Clock Operating Standard
Ext Ref Clock Input Ports
Signal
PP2S 10 msec
10 MHz
61
JD7105B Base Station Analyzer
Port Switching Standard
Default
Ext Ref (SMA) Automatic switching
(Input signal level >-3 dBm)
GPS (SMA) Automatic switching (GPS
signal received)
Default
Trigger (SMA) Manual switching
GPS (SMA) Manual switching
Characteristics
TTL compatible
Analog: -10 to +10 dBm
GSM/GPRS/EDGE SIGNAL ANALYZER