Fischer Panda AGT 6000 PVMV-N Manual page 34

The Panda Generator
DC-alternator
All Panda generators from Panda 6.000
are provided with its own charge system for
the 12V DC mains. This DC-alternator is
powered over a v-belt together with the
internal cooling water pump. The 12V
charge system may be used only for the
generator-own starter battery.
Fig. A.3.5-7: DC-alternator
Charge control for DC-alternator
The voltage regulator for the 12V DCalter-
nator is on the back of the air suction hou-
sing. The housing is formed for cooling
purposes. The voltage regulator may not
be covered from the outside. The surface
must be accessible for the cooling.
Fig. A.3.5-8: Charge control
Diode plate
Fig. A.3.5-9: Diode plate
Page 32 AGT 6000 PVMV-N 12V_24V - Chapter A: The Panda Generator