Cuisinart Veloce EM1000U Manual page 59

NOTE
The descaling process runs in in 2 phases (phase 1: descaling process with descaling
solution; phase 2: rinsing process with clear water), takes approx. 10 minutes and
should not be interrupted.
In the event of a power failure during descaling, the program has to be restarted!
WARNING
Irritation to skin or eyes can occur if they come into contact with the descaling
solution!
Avoid skin and eye contact.
Rinse off descaling solution with clean water. Obtain medical advice after eye contact.
ATTENTION
Scaling residue can cause long-term damage to the brewing unit and the housing
surface!
It is imperative that you rinse the brewing unit thoroughly after every descaling
process.
Remove any splashes immediately.
NOTE
During the descaling program, the water runs into the drip tray via the coffee spout.
Alternatively, you can put a receptacle (>350ml) under the spout. Empty the receptacle
when the it is indicated in the display that the drip tray needs to be emptied.
After the descaling process (phase 1), empty the drip tray or the collecting receptacle
as indicated in the display.
Press the drip tray back onto the appliance until it audibly engages.
59