Cuisinart Veloce EM1000U Manual page 40

extra light
The milk froth quantity can be varied by pressing the "-" or "+++" symbols.
Pressing the percentage button changes the mixing proportion of milk and coffee.
Use the and
desired cup size.
Press the single or double cup to confirm your selection and start drink preparation.
NOTE
Be aware that two brewing processes are performed in sequence in two-cup operation.
Put two cups next to each other under the dispensing spout. Only remove the cups
when the both brewing processes are completed.
If you wish to cancel prematurely during preparation of a coffee specialty, pressing the
button only stops milk preparation.
The coffee machine has default factory settings. If you wish to change these settings,
you will find instructions in section 5 .1 Changing and saving default settings .
After dispensing a coffee with milk/froth, you are prompted to perform a quick milk
system clean:
See also section 6 .4 Milk system cleaning
light normal
buttons to adjust the overall quantity of the drink to your
40
strong extra strong