Switching On The Coffee Machine - Cuisinart Veloce EM1000U Manual

2 .6 Switching on the coffee machine

NOTE
Before switching on, always check that the water tank and the coffee bean container
are full. Every time the coffee machine is switched on or off, it requires water for the
automatic rinsing cycle.
Do not leave the coffee machine unsupervised during operation.
Switch on the device by pressing the ON/OFF button (1) and holding it down briefly.
During the heating procedure (approx. 30 seconds) the following display flashes:
When the operating temperature has been reached, the coffee machine automatically
performs a rinse. The water flows into the drip tray.
The rinse is shown on the display:
When the rinse is completed, the coffee machine is ready for operation.
The selection menu as previously set then appears on the display .
or
16