Cuisinart Veloce EM1000U Manual page 56

Soak the brewing unit from time to time (with constant use once a week) for approx.
30 minutes in hot water and a mild detergent. Shake the brewing unit lightly under
water, then rinse all openings using a strong flow of water.
Dry the brewing unit.
Check if the ground coffee chute is clogged and clean if necessary.
Replace the brewing unit by turning it into the right position(the 'pull' notice should
be at the front and the right way up), insert the brewing unit into the guide grooves
and push it completely into the coffee machine.
Push the waste container back into the appliance and push the outlet unit into the
upper position. Close the door.
NOTE
You should only switch on the coffee machine when the brewing unit is fitted and
the door with coffee dispensing unit is closed. After switching on, the brewing unit is
adjusted and the normal heating process starts. During preparation of the first coffee
after cleaning, an increased amount of water runs into the waste container.
Before running the cleaning program, the metal sieves in the brewing unit must be
clean and wiped dry.
56