Preparing The Coffee Machine; Fitting The Drip Tray; Connecting The Milk System - Cuisinart Veloce EM1000U Manual

2 . Preparing the coffee machine

Remove any outer packaging from the unit and accessories.

2 .1 Fitting the drip tray

2 .2 Connecting the milk system

The milk system must be connected in order to dispense drinks with milk/frothed milk (latte and
cappuccino). Proceed as follows:
Open the door of the coffee dispensing unit by pulling it towards you on the left side.
Before opening or closing the door, always push the drink dispenser into the upper position,
otherwise the milk tube on the inside could become trapped.
Insert the straight cut end of the milk tube into the top left opening of the milk frother (step
1), then press the milk tube into the guides (steps 2 and 3).
Close the door. It should click firmly into place.
NOTE
Milk is a sensitive foodstuff. Always pay attention to cleanliness when dealing with
milk. Open milk containers with clean hands and tools to prevent germs from getting
into the milk.
Remove the protective plastic film from the metal grille
and fit the grille to the drip tray. Position the drip tray
centrally in front of the appliance, then push it gently
against the machine until it clicks into place.
11