Cuisinart Veloce EM1000U Manual page 37

NOTE
If the milk tube is connected, it must be disconnected from the milk frother nozzle
before dispensing hot water. Otherwise milk could be sucked in unintentionally. See
also section 2 .2 Connecting the milk system .
The coffee machine is set for standard quantities by default. You can set the cup
filling level during the first 8 seconds (each time you press a button, this increases by
a further 8 seconds) To give yourself more time to personalise your drink you should
press AND HOLD your chosen drink.
Press the buttons to adjust the drink volume.
Pressing the single or double cup confirms your selection and starts drink preparation.
NOTE
You can stop dispensing hot water at any time, by pressing the
37
button.