Cuisinart Veloce EM1000U Manual page 48

Quick Milk Clean
When you see this screen a quick milk clean is required.
You can override this if you are preparing multiple drinks by pressing the return button. If you
do not run a quick milk clean before turning off the machine, you will be forced to run a full
milk clean the next time the machine is switched on.
To clean the milk system, place a beaker with 250ml of water beside the unit. Place the split
end of the milk tube into the beaker ensuring it reaches the bottom of the receptacle. Press
the OK button to start the cleaning program. The water will flush through the machine and
collect in the drip tray. At the end of the cycle the screen will revert to the main menu.
Empty and replace the drip tray.
Full Milk Clean
When you see this screen on the display. Fill a receptacle with 250ml of water and the
appropriate quantity of cleaning solution for the milk system (Milk frother cleaning
liquid can be purchased from Amazon).
Insert the split end of the milk tube into the receptacle.
NOTE
The split end of the tube must reach the bottom of the receptacle.
Press the button to start the cleaning program.
48