Programming The Operation Parameters - Immergas ARES 440 TEC ERP Instructions And Warnings

Inspections and maintenance
4.2 PROGRAMMING THE OPERATION
PARAMETERS
ATTENTION!
Function reserved exclusively to Authorised Service
Centres.
1 - SELECTION
Use knob ''C'' to select the symbol
2 - Device management SELECTION
The display shows the status and the active sections of the system: ( - =
inactive / 1 active)
• HCM (BCM cascade controller)
• SHC
(multifunction module) optional
• BMM (burner management board)
Select the module using knob ''C'' and confirm by pressing ''A'' .
. Press ''A'' . Wait for scanning.
46
3 - Device management SELECTION
Select with knob ''C'' and press key ''A'' in order to access the tech-
nical programming area of each device (you must enter password 0000).
4 - SELECTION
Select the parameter using knob ''C'' .
Press ''A'' (selec).
5 - MODIFICATION
Rotate knob ''C'' to edit the value.
Press ''A'' (save).