General Warnings - Immergas ARES 440 TEC ERP Instructions And Warnings

General information
1.8

GENERAL WARNINGS

The instruction handbook is an integral and essential part of the product
and must be kept safe by the individual in charge of the system.
Read the warnings contained in the handbook carefully, as they provide
important instructions regarding installation, user and maintenance
safety.
Keep the handbook safe for future consultation.
The appliance must be installed and maintained in accordance with
regulations in force, pursuant to the instructions of the manufac-
turer, the state of the art and by authorised and qualified personnel,
in accordance with the law.
Domestic hot water production systems must be built entirely with
compliant materials.
Professionally qualified personnel means staff with specific technical
skills in the sector of heating system parts for civil use, hot water
production for domestic use and maintenance. This personnel must
have the authorisations required by legislation in force.
Incorrect installation or poor maintenance can cause injury to persons
and animals and damage to objects, for which the manufacturer is
not liable.
Before carrying out any cleaning or maintenance operations, cut the
appliance off from the power mains by acting on the switch on the
system and/or using the cut-off devices.
Do not obstruct the intake/exhaust pipe terminals.
In case of breakdown and/or poor operation of the appliance, switch
it off, and do not attempt in any way to repair it or intervene directly.
Only contact an authorised company that has been authorised in
accordance with the law.
Any repairs to the products must be carried out by an authorised
company only, using original spare parts only. Failure to observe the
above can jeopardise the safety of the appliance and will void the
warranty.
The guarantee the efficiency of the appliance and its correct operation
it is essential for authorised company to carry out annual maintenance.
If the appliance is put out of use for downtime, any part that is
susceptible to posing a potential source of danger must be made safe.
Before re-commissioning an appliance that has been put out of use,
proceed to washing the domestic hot water production system, making
water flow through it for the amount of time required to change the
water completely.
If the appliance is sold or transferred to another owner or if the owner
moves, leaving the appliance behind, always ensure the handbook
accompanies the appliance so that it may be consulted by the new
owner and/or installer.
All appliances with optionals or kits (including electric) must only use
original spare parts.
The appliance must only be employed for its expressly foreseen use.
Any other use must be considered improper and therefore dangerous.
8