Emergency And Safety Operations - Immergas ARES 440 TEC ERP Instructions And Warnings

3.19 EMERGENCY AND SAFETY
OPERATIONS
G
F1
H
F
I
BCM
The BCM board prevents the system from shutting down if management
of the HSCP system or main boiler system are out of service (see the
BCM manual).
A YELLOW LED = flashing (communication between BMM and BCM)
ok
GREEN LED = on (Pump On)
RED LED = on (Error Code detected)
E HSCP Control panel
F Only for ARES 350 Tec Light indicating the General Limit
Thermostat TLG is on
G Fuses:
1 = 6.3 A
H Main Switch
I Only for ARES 350 Tec
When TLG General Limit Thermostat comes on it cuts off power
to the boiler and light F comes on. To re-arm it, take off the cap and
press
Condensate level sensor position
Instructions for the installer
E
NOTE: the devices are positioned under the casing
next to the control unit.
39
A
NOTE: the emergency function only switches the
burners on in the boiler to 100% in flow. All system
loads, including the manifold pump, must be
controlled manually.