Connecting The Boiler - Immergas ARES 440 TEC ERP Instructions And Warnings

Instructions for the installer
3.5

CONNECTING THE BOILER

The ARES Tec boiler leaves the factory set up for
the hydraulic (flow and return) and gas connections
located on the left side of the boiler.
To fasten the flue exhaust manifold use the screws
and gaskets contained in the accessory kit box and a
10 mm socket key.
The flue exhaust manifold is set up on the LEFT SIDE.
It is also possible to set up the outlet on the RIGHT
and REAR SIDE.
G
R M
F
F
F
Diaphragms and gaskets.
Diaphragm installed on the first and last element of the flow manifold
Ø 18 (A), internal Ø 27 (B).
Gaskets installed on all of the other elements (C).
A
18
A
B
C