Operation To Unload And Remove The Packaging - Immergas ARES 440 TEC ERP Instructions And Warnings

Modular condensing boiler
Hide thumbs Also See for ARES 440 TEC ERP:
Table of Contents

Advertisement

Instructions for the installer
3.3
OPERATION TO UNLOAD AND
REMOVE THE PACKAGING
ATTENTION!
Handle using forklift or hoist and sling.
ATTENTION!
Sling slotting points for lifting. The slings must be
assembled on the load bearing crossbeams.
To take the boiler off of the pallet it is necessary to use a jib crane, to
avoid damaging it.
- Remove the casings and harness it using slings, being careful to pass
the slings through the load bearing crossbeams of the frame.
- Tie the slings to the jib. Perform these operations with caution.
Max. admitted boilers
Do not turn upside down
Do not expose to rain
Fragile
stacked
1
Max. admitted boilers
Do not turn upside down
Do not expose to rain
Fragile
stacked
2
Max. admitted boilers
Do not turn upside dow
n
Do not expose to rain
Fragile
stacked
3
T ma x
50°C/122° F
T min
-5°C/23° F
Do not expose to sunlight
Do not store at
temperature:
lower than - 5 ° C / 23 °F
superior than 50 °C / 122 °F
T max
50°C/122°F
T min
-5°C/23°F
Do not expose to sunlight
Do not store at
temperature:
lower than - 5 ° C / 23 °F
superior than 50 °C / 122 °F
T ma x
50°C/122°F
T min
-5°C/23°F
Do not expose to sunlight
Do not store at
temperature:
lower than - 5 ° C / 23 °F
superior than 50 °C / 122 °F
16
4

Advertisement

Table of Contents
loading

Table of Contents