Installation; Basic Connections; Connecting To The Zypermx - ZeeVee ZyPerMX User Manual

1. Connect an HDMI cable from the HDMI In port on the ZyPerMX to an HD video
source.
2.
ZyPerMX, to a LAN or directly to the PC.
3.
panel of the ZyPerMX.
By default, each ZyPerMX encoder uses a static IP address of 192.168.1.10. In order to
connect to the unit, and depending upon your network setup, it may be necessary to adjust
the IP settings of the computer so that it can connect to the ZyPerMX.
For example, if the computer being used to connect to the ZyPerMX has an IP address
of 10.5.64.223, then it will not be able to connect because 192.168.1.10 is within a
different subnet. In order to connect to the ZyPerMX, temporarily change the IP address of
the computer to something like 192.168.1.x, where x can be any number except 10.
192.168.1.10 in the address bar to display the ZyPerMX Maestro web interface.
Logging In (page 8
interface.
addresses.

Installation

Basic Connections

Connecting to the ZyPerMX

for more information on logging in to the Maestro web
9 for details on setting DHCP and static IP
4
Getting Started