Rebooting The Zypermx - ZeeVee ZyPerMX User Manual

Using the reset button
1. Locate the reset
The button is recessed to prevent the unit from being accidentally reset.
POWER
+12VDC 1.0A
2. Press and hold the reset button, using the end of a paperclip or other pointed object.
Wait approximately 5-10 seconds, then release the button.
3. After about 60 seconds, the unit will be ready for use.
The ZyPerMX can be rebooted using Maestro Rebooting the unit does not reset the
ZyPerMX to factory-default settings.
1.
more information.
2. Click the Device tab.
3. Click the Reboot button, under Actions.
MEDIA INPUT
HDMI In
up to 1080p
reset button

Rebooting the ZyPerMX

The Maestro Web Interface (page 8
21
Basic Operation
ZyPerMX
High Performance
Video Encoder
IP Streaming Output
for