Table of Contents
Advertisement
Installing the Universal Two-Post Rack Kit (XBR-R000294)
Observe the following when mounting this device:
•
Two people are required to install the device in a rack. One person should hold the device, while the other while the other screws
in the front and rear brackets.
•
Before mounting your device, review any specific installation and facility requirements in the hardware installation guide for the
device.
•
Hardware devices illustrated in these procedures are for reference only and may not depict the device that you are installing into
the rack.
Time and Items Required
Allow 15 to 30 minutes to complete the installation.
The following items are required to install the device using the Universal Two-Post Rack Kit:
•
#2 Phillips torque screwdriver
•
1/4-inch slotted-blade torque screwdriver
Parts List
The following parts are provided with the Universal Two-Post Rack Kit (XBR-R000294).
34
Brocade 7810 Extension Switch Hardware Installation Guide
7810-IG101
Advertisement
Table of Contents
