Floe V2000 Assembly Instruction
Boat lift wheel kit
Hide thumbs
Also See for V2000:
- Owner's manual (56 pages) ,
- Assembly instructions manual (8 pages) ,
- Assembly instructions manual (8 pages)
Advertisement
Table of Contents
Fl.OE BOAT 1./FT WHEEi. KIT
viooo -
FOR
VS06000
ASSIMBI.Y INSTRUCT
l'/N 611-06100-0I
Issued 5/30/2019
Instruction P/N 611-05100-01
Sheet 1 of 4
a�e"
DOCKS
ON V2602 LIFTS (P/N
511-26080), WHEELS MUST
BE INSTALLED WITH ONE
SET ON THE OUTSIDE OF
THE LIFT AND ONE SET ON
THE INSIDE OF THE LIFT.
WHEELS SHOULD ALSO BE
DRILLED WHEN INSTALLED
ON A V2602 LIFT.
WHEELS SHOULD BE
DRILLED WHEN INSTALLED
ON A FREE STANDING
CANOPY (P/N 512-50099-00)
TOOLS REQUIRED
•
7 /16" WRENCH
•
(2) 3/4" WRENCHES
ORSOCKETS
•
TORQUE WRENCH
© Floe International
All Rights Reserved
Manufactured by:
Floe International Inc.
48473 State Hwy. 65
McGregor, MN. 55760
www.floeintl.com
E
LIFTS
&
NOTE:
NOTE:
Advertisement
Table of Contents
Related Manuals for Floe V2000
Summary of Contents for Floe V2000
- Page 1 CANOPY (P/N 512-50099-00) TOOLS REQUIRED • 7 /16" WRENCH • (2) 3/4" WRENCHES ORSOCKETS • TORQUE WRENCH © Floe International All Rights Reserved Manufactured by: Floe International Inc. 48473 State Hwy. 65 Issued 5/30/2019 McGregor, MN. 55760 Instruction P/N 611-05100-01 www.floeintl.com...
- Page 2 Floe Boal I.ill Wheel Kil □- - - - - □- - - - - PIN 511-05100-01 ------ i-------- Kit Includes: ==================== --------------------] ------ ------ ---------------------- ( 2 ) Spacer, Polyethlyene - 2 . 3 7 5 P/N 00 7 -00006-00 ( 2 ) Boat Lift Wheel Kit Spindles 11 .
- Page 3 Slep Slide the clamps together over the frame. Insert the 1 /2 bolts into the bolt holes on clamps from the inside of the lift. Slide the spindle through the large hole in the clamp, insert the eye bolt through the hole in the end 1/2"...
- Page 4 Sheet 4 of 4...
Need help?
Do you have a question about the V2000 and is the answer not in the manual?
Questions and answers