Rack Warnings; Identifying The Contents Of The Server Shipping Carton - Inspur SA5212M4 Manual

certified grounding-type devices.
Because of the high ground-leakage currents associated with multiple servers
connected to the same power source, Inspur recommends the use of a PDU that is
either permanently wired to the building's branch circuit or includes a nondetachable
cord that is wired to an industrial-style plug. NEMA locking-style plugs or those
complying with IEC 60309 are considered suitable for this purpose. Using common
power outlet strips for the server is not recommended.

5.2 Rack Warnings

WARNING:
please be sure of the following:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• The stabilizing feet are attached to the rack if it is a single-rack installation.
• The racks are coupled together in multiple-rack installations.
• Only one component is extended at a time. A rack may become unstable if more
than one component is extended for any reason.
WARNING:
unloading a rack:
• At least two people are needed to safely unload the rack from the pallet. An empty
42U rack can weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft)
tall, and may become unstable when being moved on its casters.
• Never stand in front of the rack when it is rolling down the ramp from the pallet.
Always handle the rack from both sides.

5.3 Identifying the Contents of the Server Shipping Carton

Unpack the server shipping carton and locate the materials and documentation
necessary for installing the server. All the rack mounting hardware necessary for
installing the server into the rack is included with the rack or the server.
To reduce the risk of personal injury or damage to the equipment,
To reduce the risk of personal injury or equipment damage when
Setup
21