Furuno CH-500 Installation Manual page 62

3. CHECKING AND INITIAL SETTINGS
8. Press
9. Press
10. Press
11. Press
12. Press
13. Press
14. [Draught] is selected with the cursor; press
3-4
several times to move the cursor to the menu bar.
several times to select [System] on the menu bar.
to move the cursor inside the menu.
Menu COM1 COM2 HOR.
Go to SYS Menu Yes No
to select [Yes]. The [System Menu] appears.
System Menu
System Settings
Range Settings
Train Speed Setting
Color Settings
Language Settings
System Backup
Load Backup Data
Preset Backup
Load Preset Data
Draught Offset
TX Frequency Offset
Audio
Tests
Test Pattern
NMEA Port Monitor
Simulation
Restore Initial Settings
: Select : Change Menu: Close
several times to select [Draught Offset].
to open the [Draught Offset] window.
Draught Offset
Draught
Set the draught.
Hull Unit Stroke
Set the hull unit stroke length.
: Select
VERT ES FUNC Key
0. 0 m (-5.0~60.0m)
4 0 0 m (0~400mm)
: Change Menu: Apply
or
System
to set own ship's draft.