Furuno CH-500 Installation Manual page 38

1. MOUNTING
11. Apply liquid gasket (TB1121 or TB1184) to the inside of the shaft fixture, then fas-
ten the shaft fixture to the soundome shaft temporarily.
12. Move the shaft fixture to the neck of the soundome, then fasten the fixture tightly.
13. Fasten the supplied hex. socket set screw to the tank guide.
1-28
Hex. nut
Flat washer
: Apply liquid gasket (TB1121 or
TB1184) to the both side of the
tank guide.
Shaft fixture
Flat washer
Spring washer
Torque:
28 N•m
Hex. bolt
(M10×40)