Furuno CH-500 Installation Manual page 17

1.4.1 Desktop mounting
Prepare the optional tabletop mount kit* (type: FP06-01601, code no: 001-458-100)
for flush mounting the display unit. The items included in FP06-01601 are listed in the
following table.
*: Supply depends on configuration purchased.
Control Mounting Base
Control Mounting Bracket
Self-tapping Screw
Cosmetic Plug
Hex. Head Slot Bolt
Procedure
1. Secure the control mounting base to the mounting location, using two self-tapping
screws ( 5 20).
2. Fasten two hex. head slot bolts (M4 12) loosely to the control mounting base,
passing the bolt and screwdriver through the hole at the top of the mounting base.
Self-tapping screw
(Ø5×20, 2 pcs)
3. Secure the control mounting bracket to the control unit, using two hex. head slot
bolts (M4 12).
4. Connect the cables to the unit, referring section 2.3.
Name
06-027-2541-0
06-021-2112-0
5 20 SUS304
DP-687
M4 12 SUS304
Hex. head slot bolt
(M4×12, 2 pcs)
Type Code No.
100-409-510-10
100-281-880-10
000-162-608-10
000-165-997-10
000-162-939-10
Hex. head slot bolt
(M4×12, 2 pcs)
1. MOUNTING
Qty
1
1
2
2
4
Control mounting
base
Control mounting
bracket
1-7