Table of Contents
Advertisement
1. MOUNTING
• Install a fairing plate to the bottom hull where the transducer projects to protect the
transducer from the water pressure. The fairing plate should contact the frame of
the hull plate.
For the fairing plate, use the same material and thickness as the hull plate. Wooden
or plastic material can also be used.
Note: When you install the fairing plate with bolts, fill the bolt holes with marine seal-
ant to smooth the water flow.
For using the same material and thickness as the hull plate
Make a fairing plate to refer the following figure. The figure is an example taken from
technical drawings.
For using the wooden or plastic material
Make a fairing plate to refer the following figure.
1-14
Air vent
Example: Technical drawing of the fairing plate
Hull plate
Doubling plate
After installing the fairing plate
Bow
Frame
Bow
Hide quick links:
Advertisement
Table of Contents
