Furuno CH-500 Installation Manual page 14

1. MOUNTING
Procedure
1. Secure the bracket to the mounting location, using four self-tapping screws
( 5 20).
Self-tapping screw
(Ø5×20, 4 pcs)
2. Secure the fixing bracket to the display unit, using four binding screws (M4 10).
Note: Place the unit face-down on a soft, clean surface to prevent the damage to
the LCD.
3. Fasten two knobs and bracket washers to the fixing bracket loosely.
4. Connect the cables to the unit, referring section 2.2.
1-4
Fixing bracket
Bracket
Binding screw
(M4×10, 4 pcs)
Display unit