Table of Contents
Advertisement
ODSL 9, ODSL 30 and ODSL 96B
Notice!
The default settings of the ODS serial interface have to be adjusted! Further information on
configuration of the interface can be found in the technical description of the corresponding
device.
Specifications for the serial interface
Default parameter
Baud rate
Data mode
Handshake
Protocol
Frame
Specifications for Command mode
Command mode cannot be used with the ODSL 9, ODSL 30 and ODSL 96B.
The ODSL 9/96B is to be operated in the "Precision" measure mode. The mode is set
through the display menu via Application -> Measure mode -> Precision. You can find
more details on this in the technical description.
Leuze electronic
Specifications for Leuze end devices
ODSL xx
38400
8N1
no
ASCII transmission, 5-digit measurement value
<Data>
MA
248i
99
Advertisement
Table of Contents
