MAC address - IP address -individual device name
At this point, please assign an IP address (suggested by the PLC), a subnet mask and, if
required, a router address, and assign this data to the named participant ("device name").
Figure 3.4:
From now on, and when programming, only the unique "device name" (max. 255 characters)
is used.
3.5.7
Device name check
After completing the configuration phase, recheck the "device names" that have been
assigned. Please ensure that these names are unique and that all participants are located
in the same subnet.
Leuze electronic
MAC address - IP address -individual device name
Fast commissioning / operating principle
MA
248i
17