Table of Contents
Advertisement
Electrical connection
7.5
Device interfaces
Figure 7.4:
7.5.1
RS 232 device interface (accessible after opening the device, internal)
The device interface is prepared for the system plugs (PCB connectors) for Leuze devices
RFI xx, RFM xx, BCL 22.
Figure 7.5:
The standard devices are connected with 6- or 10-pin connector piece to X31 or X32,
respectively. For hand-held scanners, BCL 8 and BPS 8 with 5VDC supply (from the MA)
on pin 9, the 12-pin X30 PCB connection is available as well.
By using an additional cable (cf. "Type overview and accessories" on page 81), the system
connection can be established on M12 or 9-pin Sub-D, e.g., for hand-held scanners.
36
Open MA 248
RS 232 device interface
MA
248i
Leuze electronic
Advertisement
Table of Contents
